The YC Series Foot Sealers feature a U shaped sealing bar and sliding cutter. They come in 2 seal lengths with 3mm seal widths. These sealers allow you to seal 15-20 bags per minute.
Easy to operate.
Bag sealing: Set the timer, insert the bag, press down on the foot board and release after the timer light goes off. For best results, hold down the foot board for an additional 2-3 seconds after the timer light goes off so the seal has time to set.
Plastic Tube sealing: Set the timer, pull the film tubing positioned on the film roller through the seal jaws, press down on the foot pedal, slide the cutter across the tubing and release when the timer goes off.
Shrink Wrap sealing: Change the heating element to a round one, set the timer and pull the shrink film from the film roller through the sealing bars. Insert the object between the folds of the film, press down on the foot pedal and gently tear away the film from the sealer. Insert the open edge of the film between the jaws and seal the package again. Heat shrink the package evenly with a heat gun.
$350.00 – $425.00
At BCU our goal is to fulfill your packaging needs.
Whether you are an electronics firm in a clean room environment, a restaurant or food supplier who needs FDA approved bags, or anyone with a reason to seal or package something.
